- Handling EIFS Movement

56s

In this ARE 5.0 NCARB-approved Project Development and Documentation Exam Prep course you will learn about the topics covered in the ARE 5.0 PDD exam division. A complete and comprehensive curriculum, this course will touch on each of the NCARB objectives for the ARE 5.0 Project Development and Documentation Exam.

Instructor Mike Newman will discuss issues related to the development of design concepts, the evaluation of materials and technologies, selection of appropriate construction techniques, and appropriate construction documentation.

When you are done with this course, you will have a thorough understanding of the content covered in the ARE 5.0 Project Development and Documentation Exam including integration of civil, structural, mechanical, electrical, plumbing, and specialty systems into overall project design and documentation.

Hello, my name is Sara Beardsley, and I'm a senior architect with Adrian Smith + Gordon Gill Architecture. Today we're going to be looking at the construction of Willow Creek Community Church, which is a 72,000 square foot worship facility in Glenview, Illinois. There's two issues with placing the joints of the EIFS. So if you have any type of a movement joint in the material below the EIFS, you have to put that joint in the EIFS. The other reason you put joints is they need to apply it wet.

And if they have too large of an area and if the EIFS starts to get too dry, then the workers can't apply it fast enough to make the EIFS all work uniformly and get a good look it when they're finished. So you have to put a joint every so often, basically so the workers have a stopping point.

Log in to access files

From the course:
ARE 5.0 Project Development & Documentation Exam Prep

Duration: 36h 49m

Author: Mike Newman